A6 and mk3 Golf? havent they got differing P.C.D? the audi is 5x112 and the golf 4x100 no? or are you custom drilling them?
I know that my van is almost unrecogniceble but it was not enough for me =) I take front panels to sandblaster. Now they look as good as new I also made axle adapters. I took wheel shaft from Volkswagen, and internal serrations from subaru gearaxle. Tomorrow i just need to weld them together. And i'm also finishing the plate which i made it on PC at first and gave it to ex schoolmate for precision cut, made by the laser
hello again =) project is still holding on. I modified brake pedal and mount brake servo. I had a problem because where T2 has it... i have fuel tank... and where t3 has it... i have totaly diferent dashboard. So i modified original subaru mounting, weld both pedals together and adjust everything. It turns out very well. At the end... it works This was the first problem but not last. Next thing -> clutch. I decited that i build hydraulic clutch. In this case i don't need any clutch cable, just coper brake pipe and that's it. test fit Almost finished housing I also machined front discs in to hubs to fit audi a8 discs I only need to make adapter plates for calipers Cut the gas tank apart, cut away 11cm, welded together and waiting for TIG welding Meanwhile i also ordered new manifold and make some rear brakes adapter plates oh... and i just got new plates for my front seats and rock'n roll mechanism... and in the middle of the work i designed new pedals
meanwhile i ordered original T2A rear lamps. Made by hella, used ofcourse. I also designed front adapters for front brake calipers. Made from 7075 aluminium 25mm thick. Calipers are from Subaru impreza, discs from Audi A8. I also finished adapters for driveshafts. And i also figure it out that one shaft is right lenght from VW T2... the other one needs to be shortened. Only for 1cm. I Hope that i'll finshed it tomorow.
OK, you win, hands down! Top build thread! Holly Crap you're rebuilding everything. "All Hail the Creature" LOL
I'm realy glad that you like it =) Couse it's realy huge project and mainly i'm working on it by my self. Today i finished right driveshaft. It's shortened VW T3 shaft... Left one is original from VW T2, it fits perfectly
Today i bought my new front seats =) They're from Audi Q5 And i also weld driveshaft and adapters for drivetrain and after 3 weeks postman brought me a present. Rear lights housing
Nope, i'm still a student, but besides university i also help my friend who''s got a mechanical workshop. And again, the project. My van is still waiting for outer sills but i did manage to weld the tank together and prepare some bits for sandblasting... more to come and parts