oz bay

Discussion in 'Restorations' started by scottrs, Oct 13, 2014.

  1. Terrordales

    Terrordales Nightshift

    The second number is usually a compliance number to show that it conforms to A.D.R. standards
     
    madpad likes this.
  2. Finally my bay arrived on the drive ,time for a good poke about
    [​IMG]


    ,I knew the sills where knackered inner and outer on both sides,luckily all the out rigers and jacking points floor edges seem to be solid just needing a good rub and treated ,[​IMG]
    The cab floor a and steps are also really good ,with a small patch on the passengers side that pot riveted,and both steps needing a clean up and maybe a wee amount of new metal

    [​IMG]

    [​IMG]

    Next up passengers door and sliding door both need work but I will prob buy good second hand ones I know they can be fixed it's just ,,,,but lazy

    [​IMG]

    [​IMG]
     
    paradox likes this.
  3. Baysearcher

    Baysearcher [secret moderator]

    You might change your mind when you see the price of doors!
     
  4. [​IMG]

    Again maybe a wee bit of new metal and a clean up

    [​IMG]
    Font know what to do about the roof as it has this buckle down one side any ideas how fix this or am I looking at a new roof
     
    paradox likes this.
  5. Mmmm not look yet ,maybe I will have to unlazy myself
     
    Baysearcher likes this.
  6. The rear corner has started to go as well when I looked further the battery could probably do with replacement ,it not that bad but don't see the point in patching it

    [​IMG]

    This has me a bit puzzled was looking in the engine bay and it looked really crusty if I was honest I didn't wanna put the screw driver near it but when I did I chipped this kinda under seal of if I can call it that ,it's hard and looks like dry tar with bubbles in it ,anyone seen that before ,must of been there since new as it's mint condition under neath and is under the og paint ,my last one didn't have it just plain metal painted

    [​IMG]
     
  7. It's been a while since I last updated this not many new pics but a fair bit of work has been done ,spent a fair few hours on the front beam fitting adjusters ,New ball joint s ,track rods,
     
  8. Before
    [​IMG]

    After

    [​IMG]

    Looks far better but it's gonna have to come up a bit at the front just to low ,

    Went through the front brakes new pads ,skimmed the discs ,and new brake pipes ,

    New fuel pipes on the back ,done all the cv boots ,New brake shoes ,New exhaust ,removed the tow bar and it goes on ,but more importantly the list of to do s is getting smaller ,

    [​IMG]


    Not easy doing all this on the drive ,must be bliss to work on in Ur own garage
     
    paradox likes this.
  9. I've done loads of driveway welding for people!! Having a dry space makes life so much easier!!

    Good luck with the resto :cool:
     
    scottrs likes this.
  10. That looks like a great base to start from:thumbsup:
    Is the roo bar staying?
     
    scottrs likes this.
  11. I'm looking for a roo bar too in case your interested in selling it and Paradox doesn't want it ;)
     
    scottrs likes this.
  12. Dunno I love it ,wife hates it ,mates hate it ,my kid just wants me to start finding roos to run over to see if it works lol ,staying this now but if I ever paint it I think it will get taken off ,
     
  13. New exhaust not everyone s cup of tea but I like it ,
    [​IMG]
    Had a wee play with painting the wheels ,to cold to be fixing outside today

    [​IMG]


    Oh and my new fuel pump arrived today

    [​IMG]
     
    paradox likes this.
  14. Ok wee update ,van now running again ,New fuel pump ,New plugs ,New points ,gave up on that electronic ignition for the moment spent far y much time and money on it for it just not to work how it should ,

    Thing I noticed was when the van now runs the carbs start to freeze up ,? This norm till it heats up ,and should I reconnect the warm air intake thing.
    [​IMG]
     
  15. Keep finding these round the bus ,anyway to test em ,

    [​IMG]
     
  16. You need the warm air intake connected
     
  17. Razzyh

    Razzyh Supporter

    What are they for?
     
  18. Just trying to find out what bits I am missing to do that ,
     
  19. I think it's the voltage regulator ,this was the reason the van was parked up ,it got a new alternator and regulator ,but when I tested the voltage to the battery I have 17 ish.
     
  20. So this was my battery tray after I pulled out the rubber mat that was hiding the rot

    [​IMG]
    The rear corner was very thin and starting to come through with rust to ,no option really but to cut the rotten stuff out ,wanted to keep as much as poss but
    [​IMG]
    Ended up with this
    [​IMG]
     

Share This Page