Me bumper has been trapped on the other side of the world!!!!! A word of warning READ THE SMALL PRINT!!!!!!! I bought a ribbed 57 bumper from Melbourne and me mates son picked it up for me,I had checked the postage cost on the OZ post quick calculator and it was reasonable, when it came down to it and the finer details were added it turns out that the longest parcel you can send without it costing the square route of Greece's national debt is 160 cm, the bumper is 168!!! Drastic measures have been taken So now it is 84cm long, no prizes for guessing how this was achieved. I have been told by a 50's split boffin that the bumpers were made like this from the factory though so I dont feel too much like a butcher.
That's pretty much my ethos... I've cut the corners out of a split crew cab in sections before so I could do some repairs... So guys I know freaked as they were totally obsolete at the time
Right,decision made PGSG it is, prior to fixing the front panel we decided to spray the back of the dash and heater tube sand green as it would be far easier and more thorough, so pressure was on to pick the final colour. [/URL Had to make a strengthener for the centre of the screen Used templates to ensure window appatures were cock on
this sounds like an old puzzle - the answer would be to put it in a square parcel with the bumper going in diagonally - the parcel length will then be less than 160cm.
At last, all major welding done, dropped down on low trolly to get the body flat Put the badge on just for a photo opportunity Love the defanition and shape in that front panel!!
Yahaaa, its arrived, and its not like a Russian bride, its actually better than it looked in the pictures!!!!! Its in great nick! Cant wait to see it on, needs sticking together first though, me mates lad may hane not cut it straight down the original weld line,,, but at least we know which way up th weld it !!
Decided to reskin the cago door as there was a nasty crease in it and also to replace the lower inner as that was also damaged. Oh no the skins arrived, there was damage to the packaging and the two skins were buckled, bugger, trying to save work and it causes more, Im not blaming the company who sent them but the carrier!!! Needed to fit em today so decided to bite the bullet and repair them GrRRRR While Im moaning about panels the funnels in the bottom inner skin was set too far out, we did find an easy fix by cutting the bottom tag and levering it out then welding it.url=http://s459.photobucket.com/user/PYE-O-C/media/IMG_1811_zpsozwl7tmo.jpg.html] [/url] Had to enlarge the slot Worked a treat, more work again though!