uber rare, rear 3 point inertia seatbelt bracket

hi, will you be getting anymore of the little covers made?, iam after a pair of brackets with the covers, what payment do you take, paypal any good. Sorry if i have missed this somewhere but iam new on here, cheers warren.

 

Pm,d you

 

Trying to source a new cover manufacturer

Still got some more brackets here too

 

Can i have 2 brackets please..?

 

Sure have pm,d you

 

Hi there,

Interesting reading-these look just the ticket as with the dormobile bed the seatbelt has a tendency to slip round the side of the seat rather than sit nicely over the top of the shoulder. Covers would be nice too but in the absence of these how much for a pair of brackets, assuming the off-side is not a prob for a crossover...

Cheers,

Olly

 

Does you van have the filler neck bit sticking out in the back? Do you have a flap on your fuel filler ?

Without the covers they are £170 a pair including post

 

Hi there,

I do have a flap (cue sniggers) but as far as I can remember I don't have the sticky-outy filler neck (it's a '72 MY) but I will check- it's usually covered up by the dormobile cushion that rests on the boot box so I may be mistaken...

TTFN,

Olly

 

Hello again, just wondering if anyone has the measurement for the extra extension height above the original mounting hole (beneath the window seal) that these brackets offer?

Cheers,

Olly

 

I can have a measure this evening but off hand I think its around 5 or 6 inches

 

Ello ello, had a look tonight and I think I'm good for both the near- and offside brackets. Only pain is that it looks as though the captive nuts aren't well lined up with the hole in the skin for the bottom holes thanks to the wonky Aussie assembly but nowt a file won't sort out hopefully! Out of interest, do you know the thread size of the lower bolts so I can acquire some, assuming they don't come with the bolts? If you pm me your details I can wing you over some funds for a pair and get you my address details tomorrow morning

Cheers,

Olly

 

They're m8 mate

 

Cheers, paypal'd you the funds for a pair and i'll pm you with the postage details Sods law says that I found every sized bolt in the workshop (not mine) but m8s...!

Thanks again and look forward to fitting- think there's just enough space on the nearside to avoid hacking the dormobile boot box- can post pics afterwards if anyone is interested to see how i get on? Just need to get new belts as I'd rather have a vertical reel at the bottom out of harms way, as often at the mo the belt doesn't retract properly as it twists, which should be avoided having a hanger on the bracket and the reel on the bottom.

TTFN,

Olly

 

On their way be with you in a couple of days

 

Hi - pm'd you about your lovely brackets;-)

 

Will they fit in a '73 Westy?

 

yup, but only on one side as the wardrobe is In the way on the other, unless you shorten the wardrobe or its not a conversion with a wardrobe

 

these are fantastic. have pm'd you.

 

Cool

 

Do you have a set in stock I'd like a pair (with covers if you have them) posted to a UK address

Cheers Nick