My new ride will need lots of help !!!!

Hi Robo
I am going quite minimal , Rock and roll bed, swivel seats, a pop out table. I had a good chat to a guy at the Stamford show who owns http://www.kenscustoms.co.uk/
Really nice guy and I went to see his garage before I bought the Camper, so I think he will put the rock and roll bed in ( He uses rustylee's ) and upholster it along with the front seats and converting them to swivels (captains seats) I think that's what they are called he also quoted me for matching door cards as well.
I am putting the floor in and hoping to be able to cloak around the windows above where the door cards etc, put a new cab headliner in, as and when I get enough pennies

 

I am going for inertia seat belts, as my son will be travelling in the back, so better to be safe. I know where the original bolts were situated. I think it's a matter of buying the seat belt kit and working with it. Is there a thread on here of how to do it ?

 

I havent done a how to but ill take some pics for you tmw afternoon

If you have a drill and the right size bits to make the hole you can fit lap belts in the rear

 

3 point belts or inertia lapbelts?

 

nice bus , will be nice to just do inside just how you want it , good luck

 

Not sure about a how to but try the search facility for rear seat belt fitting, plenty have done it.

 

If you need to see anything close up then your welcome to buzz over & look at mine, it's not pretty at the mo but if it helps at all for reference etc.

The Rustylee bed fixes using the seatbelt fixings so if you don't have them you will need to get those welded in first, then rear r n r seat & rear inertia belts just bolt in!

There was no interior inside mine so bed was priority & re-trimmed the panels ourselves as we had a tight budget, we did enough to get us camping which is what it's all about for us!

 

Cheers Robo
Same here My son Luke (7) is chomping at the bit to go camping in it We have a big tent and with cooker etc so thats why i am going minimal and also cost!! I have no interior panels in the bus at all !!!

 

Inertia Paradox I am bidding on a pair on Ebay as I type

 

Thanks Paradox If you could post some pics that would be great. I am quite practical so if i can see where and what needs to be done i should be ok ( famous last words)!