So I’ve been following this post for a while and have wired my bus according to this diagram however I can’t get the relay to feed my pump. I am using electronic ignition in my dizzy, would this prevent the relay from giving an output to the 87 terminal? So I have... Pin 30-Battery feed (fused) Pin 87-Cutoff solenoid + pump Pin 31-Chassis ground Pin 1-Coil positive terminal (alongside dizzy+ & reverse light black) Pin 15-Coil negative terminal (alongside dizzy-)
Yep, thanks guys, pulled all my wires and started again and noticed I’d crossed these two. All up and running now, cheers.