Ken Take your photo and save it on your desktop - then go to this website http://tinypic.com/?t=postupload click on the "browse" box, find your picture file, select it and click "insert", in the "Resize" box, select "message board" and then click "upload now". Enter the verification code shown and when the screen refreshes copy the code in the box called "IMG code for forums and message boards" and then paste it in your TLB message, ta da. Show us those photos....
also the bot door vents are not cut out will it affect the rest of the heating if i dont have door vents
i decided i am going to make a bit of thin ply 220mm x 50mm and cover it the same then screw on as a pad with handle
The bottom door vents are to dry out the door. Water pours through them by design. So... I hope you fitted polythene membranes to your doors under those spanky new cards or they'll be going soggy before you know it.
i have removed the plastic vents that you open and close shall i cut them back in as i still have them. i thought he meant the rest of the door as that is covered in poly thanks for any help given
how many miles roughly and i bet your well busy i just noticed your near ely i have worked there only about 1 hr
no hurry but i will call you as i have now looked at your website and have some small body jobs need doing
i would like a fair bit done and a spray job but all depends on cost as you know if you are in romford any time please call me and you can quote for me
Where's Romford? Won't be down that way I'm afraid, but pics should get us in the ball park to see if you want to procede.
