FOR SALE Bay full cab headliner

Discussion in 'Late Bay Parts Classifieds' started by Diddymen, Sep 24, 2013.

  1. Diddymen likes this.
  2. from memory, I think Mrs Diddymen said for a full length tin top it would be £150 including postage

    The extra to do the sides would depend on how much of the sides you were doing, and if/where you wanted to make joins.

    If you wanted a complete section with no joins (other than where it met the headliner), you would have to do each side in one piece and cut out the window holes ... nut you would have a lot of wastage - more material = more cost

    If you were to make the side bits in sections, you would probably use less material (cheaper) but you would have joins on show

    have you got any pics of what yours looks like at present?
     
  3. PMSL ....it is strong stuff!! ......especially if your using it in the van with all the windows closed :D
     
  4. I am dude how much
     
  5. Hi Diddymen, if your good lady is still making these cab headliners I would very much like to buy one.

    Cheers
    Gaz
     
  6. Hi Gaz,

    yes she is, she has 3 half finished ...but with chrismas and getting a new kitchen she hasnt done much lately.....I'll reminder her tonight to finish them off (hopefully over the weekend) :thumbsup:
     
  7. Hi. Could i also put an order in for a cab headliner please?
     
    Last edited: Jan 8, 2015
  8. certainly mate ...I'll let you know when Mrs Diddymen has finished them :thumbsup:
     
  9. That's great, cheers diddymen.
     
  10. Coolio.
     
  11. Adrian Le Moigne likes this.
  12. Faust

    Faust Supporter

    I have got a whole bus to do are all the wires the same size from front to back , and the width of the liner is that same width from cab to back cheers thanks Diddymen .
     
  13. full length headliner?

    front (and I think last rear one) are a little shorter, the rest are the same size from memory.

    the headliner is supplied the same width, for the full length of the headliner. It does taper, but you trim off the excess to fit it to the exact size. There is about 3inches spare each side to allow for fitting/trimming to size - think from memory it is 135cm or 145cm width ...it is wide enough to wrap down to the top of the side window openings if that makes sense?
     
    Faust likes this.
  14. Hi do you know if the cab headliner is the same as a single cab one? im looking to do my pickup.
     
  15. I'm not 100% sure, does your existing one have 2 seams? with the rear finishing just behind the courtesy light level with the B posts? ...if it does I shouldn't see any problem

    If you measure from the windscreen seal, to the rear of your cab I can let you know if the size is right
     
  16. Ill have a measure up at the weekend the old headliner is long gone but i have two bows i think. the cab area looks similar to a van but the interior light is on the back panel instead of in the lining.
     
  17. Hi Diddymen, the headlining arrived safe and sound - and a handsome piece of kit it is as well.

    Cheers
    Gaz
     
    Diddymen likes this.
  18. thaks for letting me know :thumbsup:

    Mrs Diddymen will be expecting pics when its fitted you know :D
     
  19. sANDYbAY

    sANDYbAY On benefits-won't sponsor!

    Now I feel left out, where's mine?
     
  20. Had to use a different courier for yours ...Hermes couldnt deliver to you area, I'm sure they meantioned something about the film deliverance :D
     
    sANDYbAY likes this.

Share This Page