what are the fixings like.are they a plastic thing that goes in from the front with s screw affair that opens the pins up in the hole (molly clips). I need some of these to fit my sliding door panel as the westy ones are about 20 quid just for the clips.
Pretty sure that's what they come with. http://www.justkampers.com/vw-t2-ba...front-door-cards-for-vw-t2-bay-1970-1979.html FWIW the GSF ones look like the same thing, but £15 less. http://www.gsfcarparts.com/863vg0910 GSF sell a similar looking "premium quality" black plastic kick panel set - £35, not sure that's any cheaper but they might be in stock. http://www.gsfcarparts.com/863vg0930
Yep just as you describe, I used then in my homemade sliding door panel also. I got mine from halfords about a quid for 5 or 10. Will check in the garage
6 in a pack and you need 18 total for sliding door. £2.79 for a pack of 6, think I get then cheaper with my trade card though. But easy to get and do the job nicely
I used a bit of B&Q dust sheet cut up to fit, and some 10mm wide generic double sided Scotch tape. And the clips are tricky to fit , I agree they are always popping out, but they work much better if every hole has the correct sized little rubber bung in it first.
I'm sure you could fit with screws and those plastic cap things http://www.ebay.co.uk/itm/PACK-OF-5...115?pt=LH_DefaultDomain_3&hash=item2c62e4dd8b
Still not bought any new door cards...but have been messing about with my doors again today so thought I'd have a look at what's available. I've got some membranes waiting to be fitted... I never heard back from Bus and Camper re the ABS panels, but have emailed them again today. Has anyone bought any recently?
I think Bus and Camper have stopped selling them tbh. best bet is to contact werksberg directly through thesamba.com and see if he will ship to you. if bus and camper are not his UK agent anymore he may ship direct to you.
I searched worldwide and couldn't find them. Got a link? I think you may be right. He lists EVAM CLASSIC / VW SPLIT PARTS in the Netherlands as a supplier so I contacted them last night. Super quick response but no prices yet. They've got two types. Based on the advice here (and dependent on cost) I'm inclined to go for the ones with cutouts for vents... although one of my vents seems to be slightly broken and half of me is wondering whether I should just simplify things and block off another potential source of water ingress. I like the idea of allowing the doors to dry out though...decisions decisions. Looks like there are screw holes for fitting the vents to the door card.
I have the top ones with vent holes, the covers actually just push on the holes along the top are for the coating lugs of the plastic vent
no not done membranes yet and i do get a bot of water in heavy rain but i know the door cards are ok so havent rushed to put the membranes on, plus i cant find them in the garage will get a pic of the doorcard fitted for you
Theyre the ones I was about too buy a while bvackj off edbvay, but then something more important needed cash thrown at it, so I left it. Looked for them recently and couldn't find them.
http://thelatebay.com/index.php?threads/more-door-card-nonsense.51460/#post-914010 @pkrboo you're pic is in this thread, was trying to copy it
Aren't you the one that told me I should keep the air vents? Without the vents where would the water get in?