Simple (hopefully) Lowering Question

Hi,

Please can someone tell me roughly the difference X that adjusting the following - either up or down - will make to the ride height, approximately.

Front

Beam Adjusters - adjusting by 1 spline (up or down) = Xcm of height adjustment



Rear

Outer spline - Moving plates 1 spline (up or down) = Xcm of height adjustment

Inner spline - Moving torsion arm around (clockwise or anti clockwise) = Xcm of adjustment

Thanks

 

The front I've never measured.... but the rear is easy when you have a chart

 

Cheers Paul.

Just need the data for the front now.

 

hiya,

On my adjusters, each notch on the adjuster = 1/2 inch drop (13mm).

Different make adjusters may differ slightly, but that should give u an idea.

 

Cheers Grub.

My adjusters are Creative Engineering ones, they look pretty chunky.

 

not sure what make mine are as they were on the bus when I got it.

Pretty straightforward job, just have to take a bit of weight off the suspension so you can move the adjuster freely.