Hi, I've only had the camper for a week and I am trying to get the full beam to work. So far the pull switch has two positions: 1 for side lights 2 for deeped beam. The stick doesnt work to flash the head lights. Any ideas? I'm not sure of I'm not working them properly or they aren't working.
you're right, you pull the stalk!! it could be one of 3 things... 1 the switch 2 the relay 3 the wiring my money is on 3 or poss 2!! there are 2 wires, both brown, but one has a white tracer on it... one connects to earth, the other to the relay... nice and simple
Do the lights flash at all when you pull the stalk up? If they flash the wiring should be ok Has there been any work done in that area that might has loosened a wire? If they are not locking on it will be the relay, unfortunately there are a lot of poor quality relays that either stick up altogether or don't latch onto the full beam.
Thanks guys , I'll take a look today. Interesting aswell is the horn has a seperate which on the dash, hmmmm
