Apologies Tinware again

Can anyone tell me where this bit of tinware goes?

It was in the rear of my bus when I imported it and the sketch tinware drawings don't really help me!!

 

Can't see your pics, mate...

 

It's a type 4 2.0 fuel injected US engine.

 

Type 4 engine?? , it goes around the rear cylinder between the head and block

 

On the left side as you look at the engine with the front pulley facing you, the slightl curved bit with the 2 captive nuts in bolts to the lower tin,

 

Sorry I'm being a numpty.......is that at the rear (gear box end) of the engine, near side?

 

Yes, 99% sure that's where it goes

 

Just went to check.....spot on, thanks David

 

No worries

 

Next question.........Am I missing a bit of tin at the front between the fan housing and air cooler. Sorry was hard to get a clear picture.

 

I don't think there's anything that goes there

 

Good good. It appears I have a full complement of tinware!!

Thanks again

 

looks like you have UK heat exchangers on there, so my under tins would fit!!