uber rare, rear 3 point inertia seatbelt bracket

I'd be interested in this too. If it's possible I'd love to put a proper belt in the back.

 

Hi guys...not really used to the site...how do you send a pm? Cheers.

 

Click on the avatar of the person you want to pm, then click on "start a conversation".

 

I have both threaded holes just need a longer bolt for the top one.

The distance between the holes is out slightly. Can I just make the the hole in the bottom rectangle piece bigger so it lowers to the right distance?

 

Yes, but double check you picked the right hole

 

There is only one threaded hole at the top and one threaded behind the wallcard below it and to the right.

 

I used the top one shown unused in your photo. The bottom hole (which is used for the flat bracket on the centre of the belt riser) I needed to fit with a rivnut tool. I found the bolt used for the belt loop fixing at the top of the riser needed to be spaced out to avoid the bolt getting close to the window glass.

 

Hi, I would like one offside (behind driver) bracket for my RHD 73 Devon. I think it will fit as I have the two top holes. Will need to modify the seat bracket though and looks like it will be a close fit to the seat back. Should there be a hole at the bottom too? Thanks. Rob

 

Those are the correct mounting points

 

Ok great, I will take an off side one please for RHD. Please let me know how to pay. Cheers. Rob

 

Can I have a pair of these please sir, if you have them in stock.

Thanks

 

Sent you a pm

 

Hello David Hope you are well, looking for a rear LHD bracket , could you help?

Yours Dan

 

Hi David
Looking for a pair (no covers)

 

These are quality items. Expensive though, aren't they.....?

Far better to use these than take a chance with your kids. @davidoft - you seem to have sold a few brackets, pat on the back to you for [potentially] saving some lives.

Well done for having the b***s to get them made. If you need belts in the back, USE THESE BRACKETS!

 

I seem to have the top hole but not the bottom one any ideas
Cheers Simon

 

I've just had a newsletter from VWH offering these brackets as a new item. Have they muscled in on you action or are you supplying them? Hope they haven't stole your thunder.

 

You need to make up the lower fixing

 

They get them from me

 

This time next year Rodney...