Not been to van today but done a bit at home, 1st cut new panel from old headliner ply. Then get out roll of laminate. Cut a piece to size. I thought i had some spray glue but sadly not so i'll have to glue it at work on monday.
Is there room? I only ask as I'm not sure where to pur mine. Had 6x9's in the front of my old bed, byt the flappy down door on my new Westy bed doesn't leave much space
i don't have 6x9's i have 4 inch round in the rear and 6 inch round in the cab doors, they will fit easily but i know what you mean, the door is off centre and anything larger wouldn't fit.
I haven't got a photo but this is what i did. Removed the flappy door from the front of the RnR bed and put it safe in the shed. The hole left is perfect for speakers so i made a mounting plate from 12mm MDF. Cut speaker holes in this then screwed it to the RnR bed from the inside.
i did toy with removing the whole front and making a new panel 'cos who actually uses the flap? but considering the right side has a big hole where the american sockets were it's not exactly gonna spoil it if i cut another on the left side.
Bit of an update as it's quiet at work i've been tatting, moved speakers under bed, offside required a step cutting out of the bed. I made a plug for the hole and laminated it to match then fitted it to the frame. Then this is the front view, just gotta run a bead of silicone round the plug hole.
Cheers, gotta admit speaker location makes all the difference people! when they were in the sides they vibrated and farted and sounded cack, now in a 12mm ply with in effect a big box behind them they sound 100x better. At the moment they are only 4 inch ones, i might invest in some slightly larger.
lol, it may seem extreme but it will help for now and can easily be filled with rivets once i do the seals.
van sorned today (so 28 feb last day) unfortunately the tax was up on the caddy the same day and i need that for work and what with struggling to find the cash to buy it i'm on my arse for a month or two, hopefully i can tax the van again at the end of march for easter in april.
Blew a hole in my spare wheel cover yesterday with the jet wash at work, so quickly ordered a cheapy one until i find one i like, JK £16.57 delivered - not sure i like the look but it's better than a ripped one.
So that's it for a month, tax runs out today and unfortunately so did my Caddy so i'm sorned on the bus 'cos i can't afford 2 lots of tax today, was nice driving it this past few days but she's now inside again until the end of March, now i've finished playing around with the Caddy i'll use the next few weeks to do a bit on the bus, i've still got to change the starter i got to cure the hot start and also i'm going to attempt to try and stop the exhaust blowing from the head (unfortunately the head studs aren't great and i fear this may be a bad idea) i know you shouldn't use exhaust sealant but i've never managed to stop it blowing even with new copper rings and a nice flat mating surface so i think i might have to try a bit.......