Stop water getting in cab doors (seat belt mounts)

Please may I take them if they're still available?

 

They would come in handy as a key safe

 

I turned them inside out after that picture was taken and then wore them for another month

 

Yeah like you don’t wear yours for months on end..... what do you mean you don’t

 

I accept PayPal friend/ family,

Sorry I thought you was talking about my pants

 

As mine is parked 'up hill' so water doesn't drain out the bottom drain holes therfore I have drilled a small hole in the corner of the door just behind the rubber door seal which enables me to drain the water out when the door is opened. nb as the drain hole is between the seal and door skin it stops water coming out around the seat belt area).

 

Perhaps I was!

 

I’d give them a 90* wash if you do buy them

 

150 peeez ? @Barry Haynes

 

I would always try to park down hill.
I use decorators PVC dust sheet plastic from B&Q. £6 buys enough for at least 2 doors and a load spare. Use 3M double sided sellotape type stuff to hold it on.
Tucked in at the bottom as it should be.


The other thing a water puddle by the seat belt mount is doing is rotting the cab floor out round the seatbelt bracket.

I would really always park nose downhill..

This looked a bit like damp carpet. One good pull up of about 20 lbs..

Most of that came from underneath.

 

Do you have other pairs in the other frames ?

 

No they are my vests

 

I've used a shower curtain, was about £3 from Tesco as recommended by an interior trimmer I know.