@Ermintrude thanks for your knowledge! do you have a link for the Palziv stuff you used? was it Gal, Pal or 3R Foam I need to look at for what you've done on your panels? thanks again!
hey, can you dig out a link for the insulation you put on the panels in the background please? what tape did you use also? thanks Bruce
I've been informed that Flashband will also do the trick purchased from builders merchants ! Not tried myself tho !
http://www.wickes.co.uk/Wickes-Self-Adhesive-Hi-Tack-Flashing-Strip-225mmx10m/p/243011 depending on if it smells, might get some of this as well as some silent coat just to cover a bit more area with it
This is on offer at the moment inWicks! Anyone used flashing??? Is it ok, ie flammable? Or does it stink in summer heat? Seems a dirt cheap solution ??
Someone had a full deadening kit for sale on here. You don't need lots just a square or two in the middle of the panel and some heavy mlv stuff over the engine
from using both this and Silent Coat, Id use Silent Coat every time. the flashing is ok but doesnt manipulate as easy as the SC and the SC has thicker Ali and resin layers, I bought the bolk pack of 40 sheets off amazon at 80 quid and it wasnt really enough, Id get two bulk packs and be generous with it rather than counting each sheet, I did all interior metal panels except the floor and the front panel as I ran out, but its well worth the money and still comes in cheaper than dyna mat etc!
Ditto every so often Amazon does the bulk pack for £80 it makes a massive difference Sent from my iPhone using Tapatalk
Silent Coat Sound Deadening Bulk Pack https://www.amazon.co.uk/dp/B004WCU37W/ref=cm_sw_r_cp_api_3ws3xb7J8S9C7 Is this it??? Budget is a bit tight. Thinking of one pack based on recommendations, then some cheaper stuff to pad the rest out with. Good/bad idea?
thats the stuff matey, 25 - 30 % of each panel with that and the rest with the flashing is what I did, some panels I went a bit over board with the silent coat lol but its made a huge difference to the resonant noise through the metal work, like closing the doors, they sound solid now when slamming them lol, and driving, the engine noise is more confined to the engine bay and doesn't travel through the metal work now, get a good runner roller from ebay and use that and also a hair dryer to soften the pieces before applying, makes it so much easier! I live in Sheffield, if you're close come over and have a look if you like?
Thanks, picked up some similar stuff from Amazon. In the middle of fitting it So sound deadening sorted. Insulation next ?! Any cheap suggestions? I've a roll of underfloor heating stuff to try
After sound deadening, I foil taped some foil bubble wrap insulation stuff to the bus before I re attached the interior panels, should help a bit with the cold, but I need to sort out my seals, all 3 door seals are crap and let in air and some water which isn't good!
Space blanket £98/10m roll from ebay. I used about 2m worth fixed in using foil tape, after a bulk pack of silent coat of course on the inside of all the panels.