Sliding door seal fitting tips

Discussion in 'Mech Tech' started by Poptop2, Aug 3, 2012.

  1. Poptop2

    Poptop2 Administrator

     
  2. Malc I bought seals and rubbers bundle for my whole van from C&C last month when they were doing their moving premises sale cost a lot but I got about £90 off with the discount and they are all quality seals ;)
    I think they are doing a sale at the mo during the Olympics check em out
     
  3. Poptop2

    Poptop2 Administrator

    Nice one bud - will do :)
     
  4.  
  5. hailfrank

    hailfrank Admin esq.

    Not read thread but it's to do with seals so


    Told you so
     
  6. Bought seals from and ebay shop, dont want to mention the name, we bought the sliding door and the rear hatch, both are absolute c**p, sliding door didnt shut properly, the rear hatch seal drops out every time I open the hatch, buy the good ones...I will have to now..
     
  7. one thing you might want to try is adjusting the top roller... you can vary the amount the door pulls in by on in... I has a slider on a customers bus a few years ago that was being a pain to shut due to a cheapy door seal!!
     
  8. Kruger

    Kruger Sponsor

    Another vote here for the expensive C&C seal, The only problem I had was serious "User Error" moment trying to work out which way it fitted, cheers Zed/Davidoft!
     
  9.  
  10. There's a 'flappy' bit if i remember right, this goes at the back of the door with the flap pointing forward.
     
  11. On the note of cheaper seals i ordered a pair of vewib cab door seals from C&C but they only had one in stock so i also bought a cheaper one (about £20) for a temporary fix and it actually fits better than the dearer one, less need to slam the door and door sits totally flush with the b pillar and arch :thumbsup:
     
  12. Funny enough that's how I've fitted it but door won't shut, suppose ill have to adjust the top roller? I could shut it before but problem is it drops just before it closes as the track has a dip in it. So I couldn't slam it shut, I'm gonna have to have another look but atleast I know the seals on the right way. Thankyouuuuu! :)
     
  13.  
  14.  
  15. And they just might lol ;)
     

Share This Page