Resto

Our very own @lhu1281 makes the clips. VW dealer will sell you the screws without scene tax.

 

Ok mate its a middle side i need most so ill see what Simons doing with his bit and give you a shout, are they the all glass ones or in an aluminium frame?

Not to sure about having louvers, are they proper panel conversion ones?

Thanks

 

Mega bug also make and sell them but double my price and I don't know what they are like ....I must of made a thousand if I've made one over the last 10 years ....usually a tenner for 4 or £2.50 each inc post Exact copies

 

Heater control levers?
Glove box?

 

I may have some levers and glovebox and door!!

 

So I need 3 low stripes and 4 high ones by er, forgot to measure. Also could do with the bend and a couple of inches of slopey bit as this one's a work of art. .

 

That's not a problem @zed, I'm cutting Monday after noon so I'll measure up and draw where I'm gonna cut and send you a pic! That cool??

 

I'll measure up before then, I'll be lifting it's pop-top back on with it's owner and mates over the weekend.

 

Wow they must of used a tin opener

 

Chain drilled with a 10mm drill bit, prised up to perfection, then hammered back down with @Barneyrubble's club. lol
Why oh why not bend it sideways where there's no corrugations??!!!

 

I believe the louvers came out of this one which is a convert! I have the middle glass too

 

Cool, is the middle glass all glass or one of the ones with aluminium round it?

 

All glass dude, no ally frame I'm afraid

 

@Camperboy40 Can I have the"paint tin lid" from RHS of the engine bay as well please?

 

Paint tin lid????

 

That's what it looks like. 6-8" across, inside engine bay on right, gives access to the fuel filler.

 

Oh ok, never heard it called thAt before lol
Ok if you can give me the measurements for the engine bay parts soon please I may cut today!

 

I forgot to measure yesterday, I got involved in a breakdown that distracted me. You could guess from the pic? 3 troughs with all the next high bit each side, wrapped down round the corner with and inch or 2 of sloped bit x the bit I haven't measured. I'm going to have to make the hole bigger before I cover it as it's a bit mangled around the edges. If yours has an engine hatch it should be easy to judge from my pic? I'll measure today but not sure when I'll be back. If you're ready to chop first and wouldn't mind, you can call me after 11am on 07775 853875 and I will have measured it. I'll be at workshop, but no internet there.

 

Coal chisel joy!