Reseting the odometer to zero

Discussion in 'Mech Tech' started by paradox, Mar 13, 2013.

  1. Im going to be swapping my kph speedo over to a mph one
    Id like to reset the odometer back to zero miles as in my opinion my bus will be as good as new when it goes back on the road
    So zero miles on the clock seems the right thing to do

    Whats the easiest way with the least chance of breaking the speedo?
     
  2. It's really easy. I might have some pictures somewhere when I did mine. Pop the bar off the back and roll the barrels to whatever number you want
     
    paradox likes this.
  3. [​IMG]

    Pull the center bar partly out and that releases them
     
    paradox likes this.
  4. Cheers dude nice and simple then:thumbsup:
     
  5. Just watch it when you put the bar back in as the barrels can jump a bit, so you might end up with 99999 :)
     
  6. matty

    matty Supporter

    i did the same
    if you pull the bar out until its just out on one side it gives you enough room to move them with out taking all the cogs off
     
    salad.dodger2 likes this.
  7. Im having this exact problem
    Ive lost count of the amount of times i have them lined up correctly only for them to move when put the bar back into place
     
  8. davidoft

    davidoft Sponsor

    use some blue tac or tape to hold the reels in place whilst you put it back in
     
  9. I will need an MPH dial for my speedo shortly, has anyone got an idea where to purchase this? Thanks
    Tony
     
  10. Terrordales

    Terrordales Nightshift

    Chck out The Samba (http://www.thesamba.com/vw/) if you can't get one locally.
     
  11. Sorted:thumbsup:
    [​IMG]
     
    salad.dodger2 and Terrordales like this.
  12. matty

    matty Supporter

    You will need a whole MPH speedo as the drive cogs are different ebay is your best bet or one of the breakers
     
  13. No, I just want to replace the Dial to keep it street legal for the UK, I have done the same to my BMW, with no problems.
    Speed is the same wether you read it in MPH or KPH, the odometer registers the distance in Km.
    Tony
     
  14. Baysearcher

    Baysearcher [secret moderator]

    Forgive the possibly daft question but is this not "clocking"?
     
  15. SSSShhhhhhh!!! nudge nudge
     
  16. I suppose that the only problem about "clocking" is when you try to sell the vehicle to someone else, up till then you are only fooling yourself!:)
    Tony
     
  17. To me its not clocking as im keeping hold of the original speedo
    If i ever sell the bus i will include the original speedo and inform the buyer of what i have done
    Then all they have to do is add the distance from the original onto the distance of the mph speedo and they have the total distance the bus has done
     
  18. the only reason I clocked ours was all the UK paperwork said Miles. The officials (DVLA MOT etc ) had written the amount of Kilometers as miles. So when I changed the speedo it made sense to clock it to the kilo reading to make it simple for the officials.



    I convinced myself this ;)
     
  19. matty

    matty Supporter

    its only clocking if you don't declare that the mileage is to correct it when you sell it
    plus most old vehicles have had different engines, clocks etc or have been round the clock so i would never believe what it said
     
  20. "Clocking" as of itself is not illegal. What is unlawful is attempting to sell a vehicle by falsely representing the mileage. Mileage is about more than the number of miles on the engine, it's also about how far the running gear has travelled. So if you're just replacing an engine, I can't see the point, but if its about a complete overhaul of absolutely everything, then yes, I can see the point of doing something like this, because you are starting from zero with everything.
     

Share This Page