please guide me where i can buy center caps for rim center hole 66.6 mm stainless or chrome Andy idea
the other day I went to the fabric store and came out with something like that plan is to glue this fabric to the ceiling
the roof itself is insulated from the inside I installed a plywood strip in the middle between the top edge of the wall and the ceiling I installed such an aluminum profile J the same profile went to the ceiling plywood strip and plywood goes in between
on the ceiling where two profiles are installed there is a gap between them and there is place for led light stipe
good question 4 for bus 2 for teardrop trailer and 1+1 for spare they are little bit different design and i have 5 from one kind and 3 from other kind design
after some time and little pause dusted the van rock and roll bed got finally bolted together and put in place plywood base boards as well
next step was the ceiling last time finished so it was left unfinished this time made more test pieces and real pieces as well and that's how it came out looked again for the fabric I bought earlier did a test piece to see how the fabric reacts to the glue next time will be more gluing
I made some using the cap from aerosol cans and chrome paint. Not sure of the diameter but mine went straight into the centre of the wheels I made them for on my T4
Some thoughts I'm researching how big is the market for a 6 rib box and how much does it cost is anyone here interested the box is blast cleaned disassembled, replaced some synchronizers, and reassembled with new gaskets
