Yes and I've recently ripped out all the wiring and replaced the 'fixes' that had been done over the years by previous keepers try to put back as per a wiring diagram to be able to fault find in the future Sent from my SM-G930F using Tapatalk
So...is it fixed now? Two led bulbs on their own may not draw enough current to get the flasher relay “interrupting” itself.
Seems to be now... Strangely I wondered about if it was the bulbs with 4 being enough to make hazards work but two not for indicators , so I disconnected one side and hazards flashed two happily!.. but after a day of taking apart , checking continuity.. checking volts and comparing to the tintop .. got them to come on but not flash... so popped a standard bulb in the front and off they went... flashing away like good uns.. . So each circuit tested separately , now to put it all back in the right place.. all taped up Sent from my SM-T580 using Tapatalk
Think so .. who knows what tomorrow brings with electicaltrickery.. blooming temperamental stuff.... touch the dash unit and half the light stop working! Sent from my SM-T580 using Tapatalk
