WANTED Heat exchangers and exhaust

Need both sides and connections for a 2l 78 fi
Cheers

 

@dubsurftones ?

 

I do . But .whats wrong with yours ,,,

 

Said thy were falling off ???
Plus the bit that attaches them is rotten

 

Thats not good . ,
They looked solid when i saw them ,
I have a set as a spare but i paid too much for them in my newbee moments . .when i found out how
Hard they were to find , ,see if you can find a set . Ill look around germany and see if i can find a set , as well.for you .
Worse comes to worse , you can have theses and replace them when a cheap set pops up later on . If your in desperate measure
One side needs a small ten minute repair weld ,though,,

 

Actually one needs some repair on the outside ,some rot . Etc....the right on in photo

 

Cheers so much ,he also needs the joiners apparrantly and they are not available from any suppliers in the UK ,do you know where I can find a set ?

 

What do you mean by joiners ? Sorry .

 

Above pdf is left side only .
Yours is the midlle of the three ,
Picture just below the sink .in the link .
myou need the zigzag and the oval . Top right , below the air cleaner ..One they go to the heat exchangers at the front ,
The pod ones are on the bottom. , i have those , but get rrom him of course , the one connected
To the pod is drivers side ,usa . The other side not pictured there,
Be nice if you know excatcly what you need ,,,?
Most likely #2 in the pdf is what you need , the fronts dont rott. The rear does!

http://thelatebay.com/index.php?thr...eous-body-engine-westy-more-parts-19-5.62361/

 

http://www.volkszone.com/VZi/showthread.php?t=1434233

 

I basically need a whole exhaust and heat exchangers kit linking bit all together

 

Congi has your van been robbed of all the good bits?
Dubsurftones said they looked solid when he saw them, now they're shot!
Plus you have other probs with it.

Just wondering like.

 

Granted, i looked but dudnt get under to bang on them .
I could see mayby the exchangers are bad , thats normal. Sonetimes ,
but it was pretty a solid bus underneath ,,had some issues,
Hard to say all thos bits are toast,,,. Would like to see them off the bus , and then know .
Whats usable , etc...,
Wish i was there , id sort that bus out in a three day repair marathon,,,
Fire up the welder !Wheres my passport! ??, to the Landmark boys !

 

It's ace just sorting it out properly as I love it so much ,

 

No worries. But it does happen.

 

The mechanic just wants all the boxes ticking as i've got a long journey, he'd have a stroke if he saw the Devon

 

What's funny is the spell changer on android, it's awful, but it just changed Devon to Devonshire before and thstsxwhstbi'm now gonna call it
I,m not changing the above either it's to knackering

 

what ever you do cong dont let him stroke your devon bud . And i hope you get this sorted

 

No, gave the usefull bit away, I will need the bits I've got for the next engine, my Hexs need lots of work too