if you clickon my you tube link and sift through my vids i did one of the noise and the hole in the bellhousing? underneath.... it may help?
You can inspect via a cut out in the bottom of the gear box bell housing, but I doubt you'll be able torque it up. Just crawled under for a look BTW.
Just checked the Bentley manual, bolts are M8 but no length on there? The M8 bolts for manual drive is M8 X 20 grade 8G to torque of 2.0 mkg or 14 ft.lb
For the time it'll take you mate, I reckon you're best to undo manifolds and torque em up tomoro night buddy. Wish in a way I hadnt brought this up now!
Haynes has drive plate to torque converter bolts at 29 lb ft, but if they're loose Ricky, anything is an improvement until you get it right.
so i can get a spanner on from underneath? did someone look at my vid to see if the hole i found the noise coming out of is the one i can use?
Watched it fella! That's it fella, bolts need tightened!! After putting it together I can still see the parts!