Alright gents, at some point I'm going to get my bumpers shot blasted and was going to have them powder coated. However I've decided against the powder coat and I'm going to paint them the same colour as the roof. To stop the inside of the bumper re-rusting what's the best thing to paint them with (insides that is). Cheers
Mine are due to be picked up from the blasters today. I'm going to stone chip theback, Paint them with pastel white 2k then just put plenty of waxoyl on the back
Same as the outside, as long as its got a decent coat on it it'll be fine, rust only attacks where moisture can get to so if your paint is non porous moisture doesn't get through and so it cant rust, obviously using zinc rich primer and alike before paint all helps and pay special attention to the sharp edges to get a good coating over them. (this is what i would do anyway, there are probably many different opinions) also while the bumpers are off get some waxoil in the deformation panel.
You can get powdercoating done in different colours it just costs a bit more if its not a Ral or BS colour
You can specify for high gloss on ppc. Had some frames n doors done and came out really well. You could always spray the same as the front, mine are and been fine for four years, just don't be afraid and use plenty of paint.
I was originally going for powder coating but I want a high gloss finish, so if they don't do that it looks like paint.
No it's the same, sorry for causing confusion. Only put ppc to save typing it all out lol I would suggest visiting your local coaters and ask to see samples of their finishes.
some powder coaters will do you a high gloss finish... failing that, you could get it powder coated, then wet sand it and paint the outside... you'll have a more durable finish over just painting it/them!!
I wouldn't stone chip them, the rear irons are a tight fit and the front one wil be bolted up tight to the deformation panel.