Wing mirror brace bar repaired and lower seal channel repair welded in. Sent from my iPhone using Tapatalk
Some further progress over the bank holiday weekend. Corner seal channel repair welded in (I’ve made the curved bit, just need to weld that in this week). Fabricated 3 repair sections for the door card style line, and got 2 of them welded in; just a few pin holes to weld up.
I really wanted to get to the workshop and do some today but got roped in to sanding down the hallway cabinet instead Sent from my iPhone using Tapatalk Pro
Final repair for the door card style line and curved corner section welded in: Started making up a template for the previously badly repaired door bottom:
Made up another big repair panel for my door. Hoping to get the frame finished this weekend. Sent from my iPhone using Tapatalk
I’ve made a big push this week to get the door frame on the O/S complete. My repair piece for the door bottom tacked in: And ground flush. It came out pretty well. Style line curve closed up at last: Repairs made to the bottom corner: And more repairs to the seal channel: Started stripping the bottom half to bare metal: And a little while later, the bottom half all zinc primed! Hoping to get everything prepped and epoxied over the next few days so I can get the skins on and have the doors done.
I'm almost finished my passenger door after similar repairs to yours. Driver's door was done last year.
A spot of Neptune blue. The inside of our doors now look better than the outside used to! Sent from my iPhone using Tapatalk
