would these wheels fit?

Anyone know if these wheels would fit a standard (slightly lowered) late bay with no mods (other than probably changing the tyre sizes?).
ta

http://www.ebay.co.uk/itm/Mercedes-alloy-wheels-16-inch-5-x-112-with-tyres-/330857728261?pt=UK_CarParts_Acc_Wheels_tyres_Rims_Car_Wheels_ET&hash=item4d08a84905

 

woody has merc wheels on his van so i guess so you may have to go low profile tyres?

 

I think they should fit fine. Pcd is 112 and that is the stud pattern so no adapters needed.

Just check the ET size but I would think these would be a straight swap.

Size and pattern look good you just don't want them to wide as this can cause steering issues.

Good luck with them

 

them 225's might be tight, mine have got 205's on the back and they just squeeze on with no issues

 

i run 225's on the back of my bay

 

Got merc 16s on my van ET42 205 on the back.You will have to redrill the holes out to 14mm from 12mm for the studs to fit and get longer studs about 61mm long.

 

advert says the offset is ET35 but the rear wheels are 8 inches wide and the front 7 - may be a bit too much of a stretch putting 205s on an 8 inch rims?
Don;t think I would want to go any wider than 195s on the front due to rubbing and heavy steering issues.

 

No drilling for me, they just slotted straight on with 205/70/15's

 

did the fronts clear the big hub nut cap mate?

 

Mine just slotted straight on, no messing about