Is there another name for these as the two places I've found them are both out of stock.... Was tuning my carbs as it was well rich... unlike us after fixing the van.... failed ....so took carbs off to start from throttle plate adjust to start all over again. Anyway came back to linkage and spring was on tinware and no sign of socket bit.. Even ended up taking heat exchanger off to look for it in there no sign anywhere..? Also.. do I need to clean plugs of soot now too or will it burn off when (if) I get mix right? Sent from my Hudl 2 using Tapatalk
I made one out of a Marker Pen Lid. Just find some plastic of suitable diameter and knock something up, it's only to centre the linkage on the pivot.
Nice..I've stuck a 13/32 1/4" socket in there at the moment! not a bad fit..but about a mm play Sent from my SM-G900F using Tapatalk
Search for the p/n (021129957) instead of a description. VWH have brass ones in stock https://www.vwheritage.com/shop/021129957/type-4-carb-linkage-ball-socket-replacement/ Brickwerks has them too but not cheap. https://www.brickwerks.co.uk/spring-loaded-ball-cap-throttle-linkage-2-0-cu.html
