Sliding door removal

Discussion in 'Mech Tech' started by keithandtrudystype2, Jan 12, 2014.

  1. Trying to remove door, managed to disengage door slider block from track, also top roller, question is how far do you need to swing the door out to disengage the bottom roller, have got about 30 degrees from the body but it doesn't seem to want to come out, can't swing the door any further because of the ladders stored in the garage, looks like I will have to shift the ladders, just keen to know how far the door needs to swing out.
     
  2. kev

    kev

    Just push the.slider to.the front of the van there is a small.gap.for the roller to come out
     
    Lasty likes this.
  3. If you've got it disengaged from the rear track, should swing out and let you disengage the front rollers. Might need 45* - a bit more than you've got. Taking it off is pretty straightforward.
     
  4. davidoft

    davidoft Sponsor

    you need to have the sliding door right at the back of the track and probably around 60Degrees
     
    brothernumberone likes this.
  5. there shouldn't be:) have you replaced your sliding door track/middle sill?
     
  6. kev

    kev

    yes they have been replaced this is how i get mine off
     

Share This Page