Not turning over....

Discussion in 'Mech Tech' started by nicko_1982, Apr 15, 2012.

  1. A bit of a strange scenario, but most of the time my t2 turns on fine, but occasionally I turn the key & there is no turning over noise.

    I need to take this into a garage, but does anyone have any ideas from the above description?
     
  2. Starter problem by the sounds of it, faulty solenoid or sticking starter.
     
  3. Great thanks for the diagnosis, with that brief description!
    If it was to be one of those issues, are they costly repairs?
     
  4. It depends really. Worst case scenario it would be a new starter which is around the £100 mark

    You could strip and clean the solenoid and starter depending on your mechanical skills
     
  5. davidoft

    davidoft Sponsor

    what year is your bay, they also suffer from faulty ignition switches which are about 6 quid from gsf
     
  6. Yup could be a ingnition switch on its way out mine did this for a while before packing up alltogether
     
  7. my bay was manufactured in 1972.

    Is it worth picking up an ignition switch & changing that first to identify if the problem still exists?

    I guess for £6 its worth a shot
     
  8. davidoft

    davidoft Sponsor

    show me a picture of your ignition where the key goes into it, your may have the earlier type which cost £35
     
  9. Ive got a new earlier type ignition switch here if you need it

    It was bought in error as my bus had the later plug connecting type switch
     
  10. Great thanks Paradox, I'll send a photo in tomorrow

    Cheers
     
  11. If you turn the key and get nothing sometimes then it`s probably the 12v wire that goes to the starter motor or you ignition switch..

    the 12v wire corrodes/ages and instead of pushing 12v to the starter over time pushes less ,so it`s a gamble when you turn the key...
     

Share This Page