Master cylinder reservoir cap.

Discussion in 'Mech Tech' started by Betty the Bay, May 30, 2020.

  1. Betty the Bay

    Betty the Bay Supporter

    Quick question about my broken/ disintegrated cap .... if a replacement isn't forthcoming, is there any reason why a suitably sized cap off say a polish bottle, can't be used if zi make a small air hole in the top ?
     
    Betty the Bay, May 30, 2020
    #1
    Meltman likes this.
  2. Baysearcher

    Baysearcher [secret moderator]

    Baysearcher, May 30, 2020
    #2
    Betty the Bay likes this.
  3. snotty

    snotty

    ^ all the usual suspects will sell you one, although the Yorkshire Solution would work.
     
    snotty, May 30, 2020
    #3
    Meltman, Lasty and Betty the Bay like this.
  4. Betty the Bay

    Betty the Bay Supporter

    Yorkshire way then, until a replacement is sorted!
     
    Betty the Bay, May 30, 2020
    #4
    Meltman, snotty and Lasty like this.
  5. snotty

    snotty

    Worth looking to see if there are any in the shape of a small flat cap :thumbsup:
     
    snotty, May 30, 2020
    #5
    Meltman and Betty the Bay like this.
  6. Betty the Bay

    Betty the Bay Supporter

    Do I need to start a "what polish " thread?
    Autoglym one seems to fit ok.
     
    Betty the Bay, May 30, 2020
    #6
    snotty and Meltman like this.
  7. Meltman

    Meltman Sprout Lover

    That's a bit posh have you tried Hendos? ?
     
    Meltman, May 30, 2020
    #7
    Betty the Bay and snotty like this.
  8. mikedjames

    mikedjames Supporter

    Use a jam jar plastic sealing circle with an elastic band for a homely and cheap solution...
     
    mikedjames, May 30, 2020
    #8
    Betty the Bay likes this.
  9. Betty the Bay

    Betty the Bay Supporter

    Autoglym polish top with very fine hole in top fitted.
     
    Betty the Bay, May 30, 2020
    #9
    mikedjames likes this.

Share This Page