Hi all, Was considering putting a set of 17 inch foosh (fuchs replicas from Midland Wheels) on my late bay. I've got a set of 215/45 tyres lying around, so was gonna use these. My bus has been dropped at the back 1 spline (I think) and lowered a couple of inches at the front on adjusters. Also note that the centre caps that cover the hub nut are quite big, so how do these wheels cover that as they look quite flat in the centre to me. is anyone running this set up and do they have any rubbing problems ( a photo would be ace so I can get an idea of how it looks). Cheers peeps.
i run 225 width tyres on the back of my bay so tyre size isn't going to be a problem what you will have to check is the wheel off set
Taking to other people, it looks like you need to get the foosh wheels with the 20et for the centre caps to fit on. A 40et will make them sit 20mm further in, but the centre caps will not go over the protruding hub nut and cover.
