Front dual mount aerial

Discussion in 'Mech Tech' started by earlylatebay, Sep 16, 2012.

  1. Can someone please do me a favour and post me an image of where they have positioned their dual mount aerial?

    I am about to fit one.

    thanks
     
  2. Pop round to mine 😉
     
  3. Hope this helps ....




    By the way - reception is terrible - water has run down the mast, and its gone rusty after only 15 months (came from JK).
     
  4. Woodylubber

    Woodylubber Obsessive compulsive name changer

    Mines still in the garage, In the end I did'nt wanna drill holes in the front panel
     
  5. i brought a wrong one. and decided against having more than one hole in the front, i'll buy a standard one when i remember and try to remmeber to drop it when i wash the van lol..
     
  6. cheers scoob, and everyone else. Dont have any radio at the moment. So any is an improvement. got a stainless one so hopefully it will last better.

    Not from JK, dont buy anything from there anymore that isnt a genuine part.
     
  7. doesn t matter if its stainless it will still rust its not the mast thats the problem the water runs down the mast and rusts the cheap bits that are fixed to the cable . the spring etc at the bottom , if you haven t drilled it yet i wouldn t bother get a internal arial :)
     
  8. wot the guys ^^^ said - I wish I hadn't drilled my nice new front panel ....
     
  9. Hmmm. Who makes the best internal aerials? That actually work. Had a Halfords one and it was aweful. It was supposed to boost the signal with a 12v feed but it was still crap.
     
  10.  

Share This Page