WANTED Carb set up for 2.0l type 4 engine

Discussion in 'Late Bay Classifieds' started by Robert Hamilton, Nov 21, 2020 at 8:57 PM.

  1. Hi, My friend is looking for a carb set up for 2.0l type 4 engine to replace fuel injection system that is proving to be a pain to get working. If anyone has anything let me know price etc.
    Cheers
    Rob
     
  2. garytype2

    garytype2 Sponsor

    I have ton of injection spares
    Gary Coolcampers 07979 726763

    Sent from my SM-G973F using Tapatalk
     
  3. I have the original twin Solex carbs, manifolds, airbox, and various bits of linkage and balance pipe that I took off mine when I fitted the Webers. £100 posted the lot. Will dig out photos if interested. Note they were running but I think need a refurb.
     
  4. If you can some pics that would be good.
     
  5. Found this one on my phone. Gives you an idea
    [​IMG]
     
    Last edited: Nov 21, 2020 at 10:33 PM
  6. They look ok, I’ve just sent them to him.
     
  7. Out of the frying pan into the fire.
     
    Razzyh likes this.
  8. Tell your friend to spend the money on fixing the FI, it’s better than any carb set up on a standard engine.:thumbsup:
     
  9. I would stick with FI if possible. If he is determined to go carbs he would be better off investing in a twin Weber 34ict set up or if he can run to it dual Weber 40IDF’s.
    Tell him to take a look at Classic carbs or Eurocarb websites they have them.
    The original Solex set up works well if the carbs are not worn and set up properly. :thumbsup:
     
  10. I have a complete fi set up minus the controller if he wants to stick with Fi
    Looking for around &£100 for the lot
     
  11. They do work well, but unless refurbed and set up it already I'd say it would be as easy to get the FI working and a better end result, particularly if it's already there and fitted. They all seem to have the same problem - that flap thing with the wiper that wears the track out..
     
  12. The bus is a USA import and it’s not ran for a long time, the fuel pressure in the rail is 6psi, it’s got a new fuel injection pump on and filters so something isn’t right.
     
  13. Is this complete with all the hoses etc?
     

Share This Page