Is there any how to's on cab door rebuilds? ............ basically I've got bare brand new cab doors to put together, I've got my originals to strip the bit from and ll new clips, seals, scrapers etc its non opening quarter lights and I've also got new up right bits that go between quarter light glass and drop glass so what order should I start and are there any tips or tricks that I need to know any help greatly appreciated
Thanks Bodyrock, fortunatly enough HorTs was around today to give me a few pointers ...........it was pretty self explanetary once I got started
Hey Diddy.. What's the new up right bit that goes between quarter light glass and drop glass called? What's the cost of the door rubber seal kit etc at the moment in the UK? John
Hi John, the complete seal kit for fixed quarterlight windows are about £80 per door from JK :- http://www.justkampers.com/shop/t2-cab-door-seal-kit-nearside-left-9-parts-j11594.html the upright is listed as 1/4 window bar for fixed window on VWHeritage .....but they are an eye watering £48 each !! :- http://www.vwheritage.com/vw_spares_1-4-Window-Bar-Fixed-T2-68-79-1pc-Chrome-Left-211837409C_act_shop.product_pID_112276941_lang_EN_country_GB.htm?crumbStartPage=5&crumbStartRow=59 as you will probably find out, if you need that your C frames will probably have rotted out too!! so you might be better to buy the upright and C frames in a bundle as it works out £2 cheaper :headscratch2: http://www.vwheritage.com/vw_spares_1-4-Window-Frame-Fixed-T2-68-79-2pc-Silver-Bar-Right-211837410S_act_shop.product_pID_64731690_lang_EN_country_GB.htm?crumbStartPage=1 luckilly my bus came with the lot brand new (except the C frames) when I bought it ........hope that helps mate