Has anybody fitted the cheaper Brazilian servo and master cyl units ,what modifications do have to make to the mounting bracket , and are there any other adjustments you have to make ? cheers thanks .
Just the mounting bracket. The hole centres are closer vertically and further apart horizontally. Horizontally, just over half of each new hole will be on the plate.
Did it lying on my back in the drive, fairly easy to do just a case of altering the mounting holes to suit. If i remember took about 1 1/2 hours. Quality fine. Well worth doing.
Is it a question of re drilling and welding up old holes or round filing the existing holes , have not bought it yet ....just interested what i have got to do cheers .
Quality fine, it's smaller but I haven't noticed a difference in use either. Your existing M/C will fit right on. The inlet for the vac pipe is at 90 degs and contains a non-return valve (not a lot of people know that). I pulled it out and pushed in the one from my old servo as I already have a non-return valve and the direction made the plumbing awkward. No harm having two non-return valves of course if you like.