Wiper motor parking - drive crank angle

Before fitting my freshly lubricated wiper motor mechanism back into my '79 Bay i thought check the Interweb to make sure all the angles are correct etc.
I am pretty sure the motor/mechanism is original and untampered with but looking in the so called Bently manual i found this:

Whilst mine, in Parked, looks like this:


If i adjust mine, as in the Bently manual it would look like this:


I know I am probably being anal about it but i do like to know that it goes back together as VW intended,
Oh, and i read this:


So, what are peoples thoughts on how the crank position on the motor should be on a RHD '79 Bay?
- apart from "chuck it in and drive it"

 

Long time since I did mine, but I recall Bentley is wrong, and the crank should be 180* from the position in their pic. Others will know for sure.

 

Bentley is wrong; the top pic is correct.

 

I set mine up as per Bentley and fell about laughing when I tested it out and the wipers proceeded to clean the headlights

 

Turn your van upside down!

 

Thanks Mr Snot, that was exactly my thinking.
The Bentley manual is probably based on a LHD vehicle, which it maybe correct for.

 

Someone on here pointed it out ages ago. Stopped me from making the same mistake!

 

Your top pic is how it should be for a German manufactured bus LHD or RHD where the wipers park on the right. Bottom pic per Bentley the wipers park on the left.