Wheel cover

Discussion in 'Mech Tech' started by Fernando Palmela, Jan 21, 2016.

  1. Hi guys, i have an prototype bay 4/1971, for camper, but the wheel covers are always falling, help me please.
    Hhe hub caps coming off.
    They are original, i don´t understand the cause, but i saw some pieces here that you put on wheels to fixed the hub caps, you know?
    The hub caps they are these.
    https://www.vwheritage.com/shop/2516011 ... ombi-spec/

    BR
    Thanks.

    Fernando Palmela
    fernando.palmela@hotmail.com

    earlybay 4/1071
    11 sedan de luxe 6/1955
     
  2. Hi guys help............:(:(:(:(:(
     
  3. Ive no idea im afraid. Mine are orignial vw ones and they never fall off!
     
  4. I'd mail heritage and ask .but my money is that they are just rubbish ...find a set of 70s original
     
  5. bernjb56

    bernjb56 Supporter

    My stainless ones are a loose fit so I run a bead of silicone around the wheel.
     
  6. Welcome Fernando - I have original ones on mine - at least I think they are - they are a tight fit and need a good pull to get them off - perhaps look for some originals on ebay.
     
    snotty likes this.
  7. Same here:)
     
  8. Silicone ....?
     
  9. Hi guys thanks for ideias, but i don´t understand why?
    I bought 4 hub caps new, but...................:(:(:(:(
    Silicone????????????
    I´ve been told to stick caps and weel and put screw
     
  10. Silicone multi purpose sealant from d.i.y store.
     
  11. I know what it is ..I stick it round the bath ....gently mallet the hubcap smaller or send them back
     
    zed likes this.
  12. Sorry that was for the OP, but you should really use a better quality sealant meant for purpose for round the bath :thumbsup:
     
    zed likes this.
  13. Welcome, Fernando! If you've got an prototype bay, you possibly need metal clips on the wheels to hold the hub caps on.
     
  14. Thanks guys, but i don´t understand why this´s happening?
    The model of the mine earlybay is rare?
    Yesterday replaces the pump brakes were of, was very old, 44 years
     
  15. It's happening because they are NOT genuine old hubcaps but new poor quality ones made in Brazil .....
    You have bog standard late wheels with the small 5 112 pattern ?

    Stainless ones rust and don't fit either ...you need old genuine hubcaps
     
  16. Its because you have bought the wrong ones it seems the link says this .....

    For Vehicles
    • T2 Baywindow 1972-
     
  17. Irrelevant of year he has the latebay small 5x 112 PCD wheels ....
     
    snotty likes this.
  18. Have your wheels got "lumps" pressed into them to hold the hubcaps on, Fernando? If yes, and they're falling off, it's poor quality hub caps as @lhu1281 says.
     
  19. wheels are original, for the last year when was ckeaning had 4/1971
    It is material which has more metallizing????
    And caps are replicas. But already i bought twice.
     
  20.  

Share This Page