theres a thread about this tow bar in mech tech with photos etc you might have to make up some end plates or it might go straight on , its def not for a x over and havent tried it on a late to confirm hence price its solid with the id plate and unbolt swan neck painted in hammerite good condition and v heavy can post for about £15-20 if required ++ please read mech tech thread and view pictures ++ my email is TVRCHESS@AOL.COM
That's why I've mentioned the mech tech thread about it If it was modded they have done a neat job as the welds look the same all over I was thinking it might go on with some L plates in 8mm angle iron ,which is what i had made for the cross over tow bar I bought in the end without them The local metal suppliers also said they could supply a pair of cut to size plates predrilled for £20\30 so my other plan was going to be to cut the ends off and modifiy it to fit mine as I wanted the swan neck and didn't want to cut my rear bumper If anyone wants to come over and try it before buying your more than welcome