Hi Team I have a Westfalia interior, but it is a little tired. Some of the surface layer is peeling off. I have been able to get in behind it and scrape off the original glue and wondered if anyone has a bright ideas of how to glue it back. I tried wood glue, but that did not stick probably because I put the part in g-clamps to ensure the outer surface was pressed to the glue. Thanks
You can glue it, you need a press or lots of clamps and a big thick piece of wood, contact adhesive is ok but a bit thick and rubbery, not sure what other glues would be better, maybe that double sided tape is suitable.
Hi use a wood polyurethane glue like gorilla glue it expands and all so waterproof it's perfect for laminate repair replacement screwfix doit and there own such is just as good but cheaper hope this helps
Just as an update : As usual I end up doing something different to what people ask and I used Evostick stick like Sh*t. Mainly because it was cheaper and I read a good review somewhere. Anyway, it has a worked a treat and I am really pleased with the result. Looks like it will be useful for loads of other things. Thanks for replying all.
report back in a couple of months, lots of glues release as they dry out and the laminate comes back off
