Techenders - 21st to 23rd April - Who's coming?

Discussion in 'Shows Events You've Missed unless you went' started by Baysearcher, Feb 25, 2017.

  1. Wire from full beam to spotlight switch, wire from switch to relay, wire from relay to lights, live and neutral to relay :):thumbsup:
     
    sANDYbAY likes this.
  2. sANDYbAY

    sANDYbAY On benefits-won't sponsor!

    Thanks for the advice Mick. :thumbsup:

    I understand every single one of your words, individually. It's when they're all put together like that I go a bit hazy.

    What sort of relay do I need to get and how many different colours of wire should I buy?

    Also, if I wire it like you said will the full beam still work whether the spots are on or not?
     
  3. Full beam will still work as it is, if you turn spotlight switch on it will then operate the relay, that will then send the power to the lights. What watt bulbs are in the lights, I would think a standard 35amp jobee will do but am no electrician, I think 120w at 12volts is around 10 amps, they are probably only 55watts each so plenty
     
    sANDYbAY likes this.
  4. sANDYbAY

    sANDYbAY On benefits-won't sponsor!

    Ok I'll get a 35 amp relay. As far as I know the bulbs in the headlights are the same ones as Mr Volks Wagon fitted when he made it.
     
  5. @1973daisey will possibly be able to assist, There was a post earlier on what 35 amp relay to buy but I cant remember where !
     
    sANDYbAY likes this.
  6. As Mick says bob get a 4pin relay cheap 35 amp ones from Halfords around £5 I'll bring the rest !! Is the oil temp gauge still going strong I fitted few years ago


    Sent from my iPhone using Tapatalk
     
    sANDYbAY likes this.
  7. Bob , ironically I'm in the position as you


    Sent from my iPhone using Tapatalk
     
  8. This might help [​IMG]


    Sent from my iPhone using Tapatalk
     
    Razzyh, Lasty, sANDYbAY and 2 others like this.
  9. sANDYbAY

    sANDYbAY On benefits-won't sponsor!

    Perfect mate. :thumbsup:
     
    1973daisey likes this.
  10. sANDYbAY

    sANDYbAY On benefits-won't sponsor!

    paul2590 likes this.
  11. Pretty much as Paul shows in the diagram I'll have it all bar relay Bob


    Sent from my iPhone using Tapatalk
     
    sANDYbAY likes this.
  12. See I almost look like I know what I am talking about, anyway back to the roof :-(
     
    CollyP and 1973daisey like this.
  13. Going to grab ur engine today mate if he in


    Sent from my iPhone using Tapatalk
     
    3901mick likes this.
  14. Ta x
     
  15. MorkC68

    MorkC68 Administrator

    haven't you finished that yet :eek:
     
  16. Should be coming, waiting for j tubes as heat exchangers leaking.
    Joe passed his test and is driving the beetle he had off Woody so he should be there in it as well.
    If we make it I would appreciate it if @davidoft could give a hand with my ill fitting doors.
     
    1973daisey, Robo, art b and 2 others like this.
  17. davidoft

    davidoft Sponsor

    I can probably take a look
     
    1973daisey and paulcalf like this.
  18. Baysearcher

    Baysearcher [secret moderator]

    You're going to have a queue!
     
    1973daisey and davidoft like this.
  19. Congratulations to Joe! He should take himself to big bang with his mates, rather than come to techenders with a load of old farts
     
    art b likes this.
  20. Thanks @davidoft, hi @paulcalf I think joes looking forward to showing off the beetle.
    And anyway I'm still 20 inside my head
     
    1973daisey, Robo, paulcalf and 2 others like this.

Share This Page