Spring plate bolt washers

Discussion in 'Mech Tech' started by andyv, Oct 21, 2019.

  1. I'm off to get some nuts and bolts. I discovered that there are no washers fitted to the big heavy duty bolts on the rear spring plates whereas the drawings show spring washers under the boltheads and flat washers under the nuts. Does anybody know what I need to get?
     
  2. Dubs

    Dubs Sponsor supporter extraordinaire

    As you say, it's supposed to be one spring, and one flat washer per bolt. Think they are m14 on buses. (Best check though, my memory isn't the best in the world!)
     
    andyv likes this.
  3. 77 Westy

    77 Westy Supporter

    The parts list has p/n 211501137 for the spring washer and N 0115341 for the plain washer. The bolt has a spring washer and the nut & bolt a spring and a plain washer.

    And while I have the page open – the damper has two N 0122323 spring washers at the top and one spring washer and a 043101129 plain washer at the bottom.
     
    Dubs likes this.
  4. Many thanks. Is there any indication of the size. Is it 14 mm as Dubs suggests?
     
  5. 77 Westy

    77 Westy Supporter

    Dubs likes this.
  6. 77 Westy likes this.
  7. Is that your actual French?
     
  8. Non, je suis anglais, mais je sais un mot ou deux. Je ne le parle pas.
     
    davidoft likes this.
  9. Ooh, la, la!
     

Share This Page