Splash shield

Hi all
I’m just trying to fit splash shield
It is the same as Bentleys but appears to be wrong way round

 

The last picture is also from bentleys but it shows the splash shield covering the disc
Have I done it right??

 

Have you tried it other way round ?

 

Mine looks like this.. 10 years on ...

It has a lip that flares away from the disc, not over it.

 

Yes but there is a 6mm lip on it so it doesn’t fit flush with the spindle and would deform if you tightened the bolts

 

Looks similar to mine but usually the lip on the outside helps protect the disc
It all fits ok so I’ll put in the seal and bolt it up

 

Just had a fondle under my bus and yes the lip does go on the outside.

 

It'll only fit one way!
Like the diagram.

 

you cant't beat a good fondle

 

Bit of a dirty one, TBH

 

No it doesn't and yes you have.

 

Do you mean that the lip doesn’t cover the disc?

 

It doesn’t. It can’t.

The lip faces toward the centre of the bus.

 

D'oh!! Just realised these are discs, not drums, so pls ignore my deleted post - if you saw it in the first place!

 

This is fronts, not rears

 

Know what you mean ...the picture in Bentleys does give the impression it should be fitted with lip covering disc from the shadowing on diagram .

 

Thanks all