Hi all, I want to fit rear belts in the camper, ideally inertia reels but I cannot find any mounting points. The PO has fitted new roof lining covering everyting, can someone give me a clue please? Thanks.
If it has them they'll be below the rear window, on the rear wheel tub and under the rock and roll bed.
i have some brackets to fit 3 point belts, if you have the points fitted from the factory, got a picture of one of your rear side windows and seal?
Above is right. If it started off as a minibus, like a Devon or or Westie, it will have recessed windows and mounting points, but if it is a van conversion it will have flat windows and no mounting points. Windows are the clue.
With the caveat that mine started life as a minibus as described above ....... You should be looking for a mounting something like this on the rear wheel arch: You should also find a series of 'captive nut' threaded holes across the back of the engine bay, possibly with black plastic plugs. Finally, there is a 'captive nut' threaded hole on each side just below the side windows, giving you your three points. In mine, the seatbelt cassette is bolted to the holes at the top below the windows. Cheers Popester63
