79 Devon sundowner. A converted transporter. Just took out the rear windows and was under the impression they should be flat while the van sides are curved. Mine are curved. So was wondering what seals I should get. Currently
Hi mate there the same as mine . The window glass is always curved on the panel van conversions. You have the right seals there . Cheers
Seals direct - great service .. https://www.sealsdirect.co.uk/request-catalogue.asp Can`t remember exactly which one i ordered but they provide samples - top telephone service which probably won`t be available until this lot is over ....
Curved glass is correct for a panel van and the seal you`re holding , flat glass is for a less superior factory conversion .
These seals have leaked leading to some damage around the frames. Does anyone know a decent replacement seal? Also do you use adhesive? Think I might need to until I get a chance to properly replace frames
^^^^ If damage can`t be seen with the seal in place ... Fit the seal and window. BEFORE you fit the filler strip run a bead of clear silicone around the seal . Fit the filler strip before the silicone cures . If the damage is too much , fill the damage with Isopon 2 pack filler/fibreglass , touch up paintwork and fit as above . If you really can`t be bothered measuring the seals you took out the usual suspects will happily sell you window seals ......... At twice the price that don`t fit ..