Oops

Discussion in 'General Discussion' started by pkrboo, Jun 7, 2016.

  1. New carpets being fitted in the kids bedrooms today, so this morning was a quick Google round on all the loose floor boards. Checked all over and whacked a few carefully placed screws in.

    Then this happened

    [​IMG]
     
    jivedubbin and Merlin Cat like this.
  2. Mind you don't stick
    A screw in that pipe.
     
  3. Hmmmmmmm
    Talk about hindsight eh
     
  4. All seems rather dry? Gas pipe?
     
  5. MorkC68

    MorkC68 Administrator

    No Smoking in the workplace :eek:
     
  6. Ironically the gas board are outside digging the street up for the 7th time in the same place to fix a gas leak
     
  7. give it a good clean put a small dent in it where the hole is and pool some solder in there. Usually works.
     
  8. looking at the angle you might have to wipe the solder into place. worth a try if you've got the gear!
     
  9. Just put the screw back in man !
     
    Zed likes this.
  10. Yes get the carpet fitter to fix it !
     
    Moons and Merlin Cat like this.
  11. Baysearcher

    Baysearcher [secret moderator]

    This
     
  12. That's one expensive screw

    Sent from my Nexus 6P using Tapatalk
     
    gameman141 likes this.
  13. Yeah but cheap comparatively, luckily he lives round the corner and doesn't mind the odd cash job
     
  14. Merlin Cat

    Merlin Cat Moderator

    Nooooooooo!!!!!
     
    Dicky likes this.

Share This Page