WANTED OG Rear Mud Flaps

Discussion in 'Late Bay Parts Classifieds' started by surreyvan, Jun 28, 2023.

  1. Hi Guys I'm after some rear mudflaps I've installed rubbish repro which are pants so if anyone has any og ones in good condition I'd be interested or at least better repro ones then I have
     
  2. theBusmonkey

    theBusmonkey Sponsor

    Do you have original fronts?
    I ask coz Chips fronts have a raised profile around the edge.

    For the rear I fitted Landrover Discovery 1 rear flaps to lhu1281's brackets.
    The profiles match quite well. The flaps look better in the flesh as I've straightened them up from the original wonky fitting and sprayed the mounting brackets black to mask further wonk.:oops:

    Been on since 2015 and cost less than 20 quid.
    Just a thought if you struggle to get an OG set:thumbsup:
    P1070833.jpg
     
    surreyvan likes this.
  3. Hi Mate nope only the rears but i like the idea of the landy ones , Thanks
     
  4. Ive got OG brackets so i guess the Landy flaps will fit no problem ?
     
  5. theBusmonkey

    theBusmonkey Sponsor

    Last edited: Jun 29, 2023
    surreyvan likes this.
  6. theBusmonkey and surreyvan like this.
  7. [​IMG]


    Sent from my iPhone using Tapatalk
     
    Skyelectrix likes this.
  8. gold dust !!
     
  9. Jules65

    Jules65 Supporter

    there's a brand new pair on Facebook marketplace for £45

    [​IMG]
     
    scrooge95 and surreyvan like this.
  10. I've just bought a set of 4 of these:

    20230710_150338.jpg

    They're as close as I could find to the OE style flaps, especially now VW has scared off all the usual suppliers from using the logo.

    The supplier is based in Turkey but easy to order from. Must be under the radar of VW at present! They're not that cheap, a set of 4 with postage cost me Euro 110, so about £95. They also come with useless Beetle brackets, so you'll need to get the proper bus ones, but they're readily available.

    Website: https://www.vwclassicclub.com/en/vw-classic-club-pacalik-siyah-takim-1200

    The pictures on the site are slightly different, what you get is as shown above, not bad quality at all, the VW isn't quite right, but it's close enough for me.
     
    surreyvan likes this.
  11. scrooge95

    scrooge95 Moderator and piggy bank keeper

    They look very similar / the same as the one's I have, although I can't remember where they came from.
    You have to adapt them slightly for the front as the originals have a slightly shaped top. I just cut a slit in the appropriate place and job's a good 'un.
    (Mine didn't come with brackets, so were cheaper - I've got the ones that @lhu1281 sells and they are a perfect fit)
    [​IMG]

    [​IMG]

    ( @surreyvan I realise you were only wanting rear ones anyway, but as Favguy posted about himself getting a set of four...)
     
    Last edited: Jul 11, 2023
    theBusmonkey likes this.
  12. theBusmonkey

    theBusmonkey Sponsor

    Sarah...our flap mounting styles are different!
    Who's are correct...if that's a thing:thinking:
    20230711_140832_hrMOEe2e1H.jpeg 20230711_140902_QElnJA3r5y.jpeg 20230711_140848_h5Q2S0lD80.jpeg

    In fact it doesn't really matter does it, but it may sense to me for the steel mount to trap the flap behind the jacking point. They arent coming off anyway to change around haha

    Edit, thinking about it, yours are more of an extension of the arch so I guess the chassis gets a bit more shielding from road muck?
     
    Last edited: Jul 11, 2023
    scrooge95 likes this.
  13. MorkC68

    MorkC68 Administrator

    Ours are in the same location as Sarah's but we use Butty's Bits brackets..I think, from what Ive read on thesamba your position looks close to what VW suggest.
     
    scrooge95 likes this.
  14. theBusmonkey

    theBusmonkey Sponsor

    Haha. Dunno. I took them off a scrapper in Albuquerque and they were fitted like that. The rubber was curved backwards like that. I assumed dealer fit.
    Doesn't matter really.
    The T3 ones sit behind the jacking points as well but they can't really go anywhere else coz of the design
    20230711_145246_e729fXF42Y.jpeg
     
    MorkC68 likes this.
  15. scrooge95

    scrooge95 Moderator and piggy bank keeper

    Yours are probably more where they should be, Neil.... and easier to fit as you wouldn't have to remove the wheel!
    But from memory, mine have to go in front of the jacking point because of..... belly pans. I fitted them at techenders a couple of years back, and I think I did have a look at both yours (well, Chips!) and also Matt's to see what my options were... but those pesky side belly pans made it a one choice answer. ;)
     
  16. theBusmonkey

    theBusmonkey Sponsor

    Mmm. Now you mention it... I do recall.
    We just do what we gotta do x
     
    scrooge95 likes this.
  17. [​IMG]

    This picture found on the samba shows the fitment and it’s how I fitted mine . Both my front and rear flaps are genuine rears (correct part numbers ) I do have a pair of genuine front flaps and genuine brackets if anyone want to get their cheque book out but the Fronts never had the VW logo . Again correct part numbers . All mine on the van look ok from a distance but are 50 years old


    Sent from my iPhone using Tapatalk
     
    theBusmonkey likes this.
  18. theBusmonkey

    theBusmonkey Sponsor

    That concurs with what I thought but didn't know for sure. I'm pretty sure our fronts are genuine and we know the rears are yours with Landy flaps. Nerdscope I'm afraid but some of the detail interests me:thumbsup:
     
  19. Don't want to upset you but I've got the same from the same guy the white turns a yellowy brown after a couple of months
     
  20. Well further along the road a friend gave me a identical white pair as Baduras so I'm going with them I think , they are extremely good quality and look a bit different
     
    Meltman and theBusmonkey like this.

Share This Page