FOR SALE Mercedes Tolimans ET 33 set of 4

£300 near Portsmouth set of 4
16 inch 5x112 stud pattern Et 33 , straight fit with not spacers adaptors etc, bolt holes are correct size too

 

What size is the centre bore?

 

tricky to measure but I would say 68mm

 

I hate you

 

You know they will look sweet on
Yer van xx

 

TTT

 

150

 

For the front 2

 

nah for all 4,

 

Thank you for your kind and generous offer but I must respectfully decline

 

I can do 3 with no tyres

 

ttt

 

if i fit these how will i know they are right?

 

because they fit xx

 

what additional information do you require ?

 

are they CLK? if so, 7" wide i think so fit should be fine. my zender wheels are 7" wide ET30 so very close in spec to these. I run a 205/60 16 on the rear so same size tyre as these (although i have a smaller front tyre for clearance/making the steering lighter).

fully forged wheel - should be very light and strong

 

92 load rating is a bit low for the rear - ideally you need 93 or higher. should be fine for the fronts though.

 

1260kgs per axle should be plenty

 

Eric Arnold photography.

 

^ just in case you wanted to see what they'd look like on a bay.. these pics popped up on my facebook feed this morning.