Losing fluid from the master cylinder 'weep hole' (at least I think it's called that) on my '76 Westy. Is this an easy replacement or should a novice look for help from a friendly mobile mechanic (or siimilar) ? Have seen a new one for £37.80 from GSF Aircooled which I guess is sourced from Brazil, anyone experience of these, cheap but avoid ?! Thanks
its easy to replace the mc loosen brake pipes, use a pipe spanner if possible loosen switches unbolt from servo, remove pipes remove mc and swap the switches to new one loosely put new mc in place and get the pipe ends started, do not tighten just make sure they are on a good few turns bolt on mc to servo tighten brakes pipes, bleed brakes and wash off all the old spilled fuid with water tea, biccy and pat yourself on the back
