Instrument bulb illumination wire

Hi

After having the dash out and photographing all the wires ... obviously there was one spare on reassembly !!

It's the wire that has the gauge bulbs on it and is the one exiting stage left on the pic below ... it has a spade connector on the end if that's any help

Any advice appreciated

Simon

 

Off the top of my head, it should go to the dimmer contact on the headlight switch.

 

Cheers

 

Should have a narrow spade on the other end?

 

Terminal 58b.

http://www.vintagebus.com/wiring/bus-79c-1.jpg