hello im here again looking for some help . I have the funds to lower my bus and get some wheels . 1 what is the best way to lower my van . 2 i have seen some wheels they are mini lights 15in and 5half inch wide . What size rubber do i put on im looking to drop my van about 4 to 5 inch . thanks for the help
I think dropped spindles personally as it's too much for the standard ball joints going so low on adjusters. You'll need to beef up the springs with coil-overs - earlybay is a good place to read of peoples experiences as they nearly all lower their vans. At the rear adjustable springplates so you can get the wheel off.